Producing the country's top garden designers since 1992
Course Materials
Thick black marker pen (Water Based)
Graphite sticks 4B
Pencils HB 2B
Pencil sharpener
Large compass with extension bar and ink pen attachment Approx. 20cm diameter without extension (don’t forget extension bar and ink pen attachment)
* Bar Compass (Min 500mm in length)
* Plan Tube: for transporting drawings
Large adjustable set square
This is a triangle of clear plastic used for vertical and diagonal line drawing when rested on the edge of the drawing board Sizes vary enormously - do not buy the smallest size or you will have trouble drawing long vertical lines. The length of the longest side should be around 250-3OOmm (10-12"). When you do your final drawing in ink, make sure you buy your set squares with angled edges that eliminate smudging.
Scale rule A scale rule (or scale) is a narrow
strip of plastic the length of a normal ruler and either flat
or triangular in shape. It has varying numbers of divisions along
each edge on both sides. The divisions are in proportions to actual
distances and dimensions and are used for making plans drawn to
scale. The scales you will most often use are 1:20,1:50,1:100,1:200
but you will probably find that most scale rules go up to at least
1:12
25m role of 60g tracing paper
* Approx.
10 sheets of A1 Architectural Blanks (Available from the college
at £2 each)
Circular template (HELIX H67)
Role of Masking tape
* Optional
extra - Drawing board - Al or AO with parallel motion.
* Items in red are not required for the
short courses